High Performance

Castrol Tribol GR 400-3 PD

VISCOSITY - 400 mm/s² at 40°C

Tribol GR 400-3 PD


Castrol Tribol™ GR 400 PD (previously called Olista™ Longtime) is a range of mineral oil based, lithium soap
greases enhanced with the MicroFlux Trans (MFT) additive system. They are particularly suited for long-term lubrication
and for heavy mechanical loads such as extremely high pressures, vibrations and shock loads.

  • For long-term lubrication, even under the most difficult operating conditions such as extreme pressure, vibrations, shock
    loads and a wide temperature range in highly loaded rolling and sliding bearings
  • For open gear wheels and worm gears at low speeds
  • Tribol GR 400-3 PD (previously called Olista Longtime 3 EP) is especially suited to highly loaded bearings in all areas of
  • Temperature application range:
    • -30°C / – 22°F to + 140°C / + 284°F for Tribol GR 400-2 (previously called Olista Longtime 2)
    • -25°C / -13°F to +140°C / +284°F for Tribol GR 400-3 (previously called Olista Longtime 3 EP)

Compared to conventional greases, the Tribol GR 400 PD Range provides the following advantages:

  • Shortened running-in phase, suited for long term and, in some cases, lifetime lubrication
  • Outstanding load bearing capacity
  • Optimum wear protection in the high load range
  • Smooths existing surface damage
  • Significantly reduced coefficient of friction
  • Age-resistant and shear-stable
  • Resistant to cold and hot water
  • Extraordinary adhesion, water and dirt-repellent
  • Extended service life of machine elements
  • Tribol GR 400-2 PD provides excellent corrosion protection
  • Tribol GR 400-3 PD helps to prevent fretting corrosion

As a result of the above advantages, the Tribol GR 400 PD Range can help lower the costs of energy, maintenance and

Operating temperature Min. -25°C

Max. 140°C
Viscosity 400 mm/s² at 40°C
Oil type Mineral / Synthetic
Thickener Lithium
Food grade No
Product type Greases
Applicable to these sectors Automotive Manufacture, Metals, Power Generation, Pulp & Paper

In order to minimise potential incompatibilities when converting to a new grease, all previous lubricant should be
removed as much as possible prior to operation.
During initial operation, re-lubrication intervals should be monitored closely to ensure all previous lubricant is purged.


Get a quote now

How can we help? Do you need more information? Please message us with your contact details, product name, product application and pack size / volumes required.

More info

Shop by Brand