Castrol Tribol GR TG 2
01736 757002VISCOSITY - ISO 125
Castrol Tribol GR TG 2 Fully Synthetic High-Temperature Greases
Castrol Tribo GR TG 2 (previously called Thermogrease™ Range) is black, fully synthetic high-temperature grease for the lubrication of rolling and sliding bearings.
Extraordinarily high load-carrying capacity due to solids.
- Rolling and sliding bearings are subjected to high pressures and temperatures.
- Fan bearings of textile machines.
- Bearings of heated calenders and drying cylinders.
- Bearings of baking ovens and kilns.
- Grease lubrication of flat and bottle glass machines.
Castrol Tribol GR TG 2 Fully Synthetic High-Temperature Greases Product Advantages:
- Extremely temperature and aging resistant.
- High wear protection.
- Low coefficient of friction.
- Resistant to hot and cold water.
- Limited resistance to alkaline solutions and acids.
- Good corrosion protection.
- Prevents fretting corrosion.
- Does not corrode ferrous metals.
- Good pumpability in central lubrication systems.
| Operating temperature | Min. -15°C Max. 200°C |
|---|---|
| Viscosity | 125 mm/s² at 40°C |
| NLGI | 2 |
| Oil type | Synthetic |
| Thickener | Organic |
| Food grade | No |
| Product type | Greases |
| Applicable to these sectors | Machinery, Metal Goods |
This product was previously called Thermogrease 2. The name was changed in 2015
- Please observe the specifications of the bearing manufacturers.
- Tribol GR TG 2 is not to be mixed with other greases.
- Thoroughly clean the bearings before introducing the initial fill.
- Fill bearing housing only about half full with grease.
- Higher temperatures are possible for short-term applications. Please contact our application engineers for more
information
Before using the product, the vehicle’s maintenance guide should be checked. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
