Castrol Viscogen KLK 25
01736 757002VISCOSITY - ISO 25
Castrol Viscogen KLK 25 High Temperature Chain Lubricant
Castrol Viscogen™ KLK 25 and 28 are fully synthetic oils designed for the lubrication of chains operating at high temperatures up to 250°C/482°F with total loss lubrication systems. They are especially useful in applications requiring exceptional wear protection under extreme loading. Viscogen KLK 25 and 28 form a transparent lubricating film of neutral odour with exceptional adherence to metal surfaces preventing throw off or dripping and low surface tension allowing the lubricant to penetrate into tight clearances.
Viscogen KLK 25 is used for chain systems in the particle board industry, film stretching in the plastic industry, overhead conveyor systems and skid conveyors of paint ovens in the automotive or machine building industry.
Viscogen KLK 28 was specifically engineered for use on chain systems in the particle board industry, including MDF (Medium Density Fibreboard) and OSB (Oriented Strand Board) plants. It can be used in continuous Metso (Küsters) presses and central lubrication systems of Siempelkamp and Dieffenbacher presses. It can be applied manually or by drip, spray or central lubrication systems.
Castrol Viscogen KLK 25 High Temperature Chain Lubricant Product Advantages:
- Optimum protection against friction and wear at high temperatures – leading to longer chain life.
- Low coefficient of friction – promotes lower energy consumption.
- High-temperature stability – giving reduced lubricant consumption.
- No dripping or fling-off at high speeds or high temperatures – reduces wastage.
- Extraordinary oxidation resistance and no hard carbon build-up – reduce residue accumulation and maintenance.
This product is compatible and fully miscible with mineral oils. However, maximum performance is only guaranteed if not mixed with any other product. Not miscible with synthetic oils based on glycol.
Storage:
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
